Pressure safe system
Designed for gas boilers, the pressure safe system allows a safe discharge of condensates and pressure release valve water. The pump Si-1800 collects condensates and pressure release valve water. A diffuser reduces the pressure of the water discharged in the pump. If a failure occurs, the pump sends a signal to a regulation box. The regulation box then closes the solenoid valve and stops cold water from entering the boiler.
Safe installation
MEASURE DETAILS
Max flow rate 500 l/h
Max discharge head 5 m
Mains supply 230V~ 50Hz - 70 W – 0.67A
Protection IP20
Max condensate temperature 65 °C
Safety switch NC 4 A resistive – 250V
Detection integrated
SOUND LEVELS
at 3,3ft or 1m in ≤ 45.00
application (dBA)
SAFETY STANDARDS
CE
EAC
ROHS AND WEE DIRECTIVES
Compliant
Ref: PS1800SCUN23
KIT CONTENT
Regulation box including 2 strain reliefs and 4 screws
Solenoid valve with 2 m cable bare ends (L,N,G)
Diffuser
SI1800: centrifugal pump with tank of 2,0 l
PVC Tubing : 10 mm ID, 5m long
Ø10 to 10 mm (3/8” to 3/8”) straight connector for clear tubing Ø10mm extension
2 bags of 2 screws + 2 rawl plugs
Ø int. 15-20-24-32-40 mm (Ø int. 5/8"-3/4"-1"- 1"1/4 -1"½) inlet adaptor for PVC pipe
Condensate self-sealing evacuation connector, Ø 10 mm int.
Ø10 to 20 mm (3/8” to ¾”) outlet adaptor for rigid tubing Ø20 mm